A vehicle’s brake pads are fundamental to slowing down your car and keeping yourself safe when driving. As they naturally wear down, it’s important to perform maintenance to keep them in tip top condition. 

Whilst brake pads will always be checked as part of vehicle checks by mechanics, they can be changed manually by the driver. Be sure to take absolute care when performing maintenance and request assistance if necessary. Check our range of brake pads and protective gloves at CarParts4Less if you are in need of the correct gear before you start. 

Equipment You Need To Change Your Brake Pads: 

• Mechanic’s gloves 
• Jack and jack stands 
• Lug wrench 
• C- clamp 
• Adjustable wrench 

Step 1 – Remove The Wheels 

Elevate your car with a car jack on a flat surface and suspend with axle stands. Remove the wheels where you need to change the brake pads. 

Step 2 – Remove

Car brake fluid is the blood of your vehicle’s braking system; without it and proper maintenance, the brakes could fail and the safety of yourself and others around you may be compromised. It is vital therefore to understand how to bleed brakes should the fluid need attention, explained below with our expertise knowledge at CarParts4Less. You can find everything you need to bleed your car brakes including brake fluid. 

Why Do We Bleed Our Car Brakes? 

Firstly though, why do we ‘bleed’ brake fluid? Bleeding brake fluid is the process of removing trapped air in the brake system, whilst also discarding some old fluid, therefore ‘bleeding’ the system. This is an essential process in car maintenance because as time passes, the fluid loses its moisture resistance and will begin to take on water, corroding your braking system’s parts. 

How To Bleed Your Brakes 

Your car’s brake fluid should be bled

Squeaky brakes can happen for a multitude of reasons, influenced by different conditions when driving. It’s important to build up your knowledge on what can cause squeaky breaks, so that you know how to fix them before further damage is caused to your safety and those around you on the road. 

Our guide at CarParts4Less will take you through the various causes of why your brakes are squeaking and how you can possibly fix them. 

Driving Conditions 

The first thing to take a look at are your driving conditions on the road. Some factors such as weather and road conditions are out of your control, so there is not much to be done with a bit of cold weather that can cause brakes to squeak. Likewise, bumpy or poorly maintained roads are sometimes unavoidable depending on your circumstances. Be wary of potholes however, as these can cause severe damage to

UK road trips are a fantastic option for a holiday this year, allowing you to explore large parts of the UK and see multiple destinations on the same trip.

As with any holiday, it’s a good idea to do a fair amount of planning beforehand to ensure that the trip is a success. That’s why we’ve put together some of our top tips for how best to prepare for you summer road trip.

Plan Your Route

It goes without saying that the most important part of a road trip is route planning. You may know your starting point and final destination but do you know what stops you’ll take along the way, or what route you’ll take between each location?

Make sure you take some time to plan how you’re going to get
from A to B, researching any particular sites you’d like to visit on the way,
and where

Windscreens play an important role in our cars – enabling you to see where you’re going and keeping you protected from hazards on the road. Cleaning a car windscreen is therefore an essential task for all drivers throughout the year. 

Our
guide below takes you through how to clean inside windscreens and outside. Take
a look out our range of external
and internal cleaning products to prepare yourself for tackling the
toughest windscreen grime. 

Begin With A Wash 

Start
by giving your windscreen a wash with soapy water, cleaning with a soft cloth
or squeegee as you go; this will begin to remove the top layer
of dirt from your windscreen. Ensure the wipers are lifted up and pointed away
from the glass as you clean. Wipe in small, circular movements to avoid
brushing dirt away from you. 

Once
the dirty water has been washed away, gently apply rubbing alcohol